High Performance Blaster 2 Coil Kit with Resistor
This Blaster 2 Coil is supplied with a 0.8 ohm ballast resistor and a terminal and boot to fit most applications. The ballast resistor must be used with stock Points Ignition and Mallory Unilite applications.
Coil Specs:
Turns ratio: 100:1
Primary resistance: .7 OHMs
Secondary resistance: 4.5K OHMs
Inductance: 8 mH
Maximum voltage: 45,000 Volts (Tested with 6AL Ignition)
Peak current: 140 mA
Spark duration: 350 uS
Features:
Improved output coil for electronic, Point, Blaster or MSD 5, 6, and 7 Series Ignitions (ballast resistor required for points)
Alkyd tower with high dielectric properties is less prone to carbon tracking
100:1 turns ratio and lower primary resistance produce high voltage output
Metal canister is filled with a premium grade oil for cooling
Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)